This flatwork Ironer is with hand touch screen, that you are able to operate the machine by hand -touch type screen
Besides you are able to watch all the machine's condition from hand touch screen including, frequency, Voltage, Electric, and speed.
Operator is also able to set up speed by the hand touch screen
LS Frequency driver
Stainless steel Ironing drum
Hand Touch Screen
1. High quality and efficient ironing result
The precise structure of double chests, springs and heating proof felt ensure the rollers to keep enough eleacticity and spring cushion, which creats the surface well-touched.
Unique lever balance pressure device and the cylinder pressure adjust system on both sides.
Unique whirl steam flow heating system for the connecting plate improves the ironing result.
2. Reliable and safe operating system
Anti-curliness device can prevent the fabrics curling in the chests.
With steam and compressed air control system, once the pressure is too low the system will alarm.
Many emerency stop buttom fixed on the ironer. Any buttoned pressed, the ironer will stop to run.
The atuomatic system can raise and lock up the rollers to prevent the fabrics and the proof felt damaged when the machine stops running in case of no power.
A big controller with interactive interface on the machine is easy for operator to program according to different requirements.
3. High efficiency and Low energy consumption
The chests have a large angle heating surface, which can improve the heating efficiency.
The ironer adopts a single drive motor which can save energy. The frequency converter system can adjust the ironing speed from 8~40 m/min with the change of temperature, type of fabrics, moisture, etc.
The chests adopt a unique heating chamber recycle system with many strips on double sides. Steam can flow in the chamber with high efficiency. In addition, the chests are covered by thermal insulators to reduce heat losses.
|Ironing scope ||0 meter to 2.5 meters||0 meter to 2.8 meters||0 meter to 3 meters|
|Drum quantity ||2||2||2|
|Drum size ||Ø800mm*3000mm ||Ø800mm*3000mm ||Ø800mm*3000mm |
|Steam pressures ||0.4 to 0.6 Mpa||0.4 to 0.6 Mpa||0.4 to 0.6 Mpa|
|Ironing speed ||<=16m/min||<=16m/min||<=16m/min|
|Designed temperature of surface ||It is 164 centigrade when the pressure is 0.4MPA||It is 164 centigrade when the pressure is 0.4MPA||It is 164 centigrade when the pressure is 0.4MPA|
|Steam consumption ||110kg/h||120kg/h||180kgh|
|Motor power ||1.5kw||1.5kw||1.5kw|
|Over all dimension ||3040*2440*14400||3840*2440*1440||4040*2440*1440|